Recent content by spdyracer

Thanks. I live in Cincinnati oh

Also I just got a track bar brace and a jcr steering box spacer and ordered a steering box brace which is on back order. Got the track bar brace installed but still need to put the steering box spacer on. Don't think any of these will fix my problem but figured they can't hurt to have.

Didn't dump anyone I have been on vacation this past week, actually just got home today. Had too much going on before I left to mess with it. This is not a daily driver for me so there is no big rush for me. I do drive it on the street and to the trails so I would really like to find this so I...

Looking for the part number for the tr on the pitman arm for serious off-road steering.

Thanks I'll check my pitman arm. Does make me think that I did have to drill it out for the one ton steering maybe it's working loose

Have no steering stabilizer, all tires are the same and have been balanced. Toe on left is -0.02 and right is -0.05 caster right is 6.6 and left is 7.0. Think I'll check the track bar bolt hole on the axle and see if it's ovaled out at all.

I was feeling it also and the place I could feel it the most was putting my hand on the steering box.

Just double checked bolts on he track bar and steering box. Everything was tight but I did crank them down a little more. Had my son move the steering wheel back and forth quickly while I was under it. Had a popping in the steering. Started taking the bolts out so I could check the spacer and as...

Thanks for the ideas. I think I'll have to look at the stearing box. My stearing wheel has a bad habit of not always being centered. Some times it is and other times it points more too the right then other times more too the left. I'll have to look at it and see if it's lose. I do have jcr...

I'll try to make this short and sweet. 98 Cherokee Dana 30, rubicon 4.5" lift. Started to have death wobble issues and here is everything I have replaced new double sheer rubicon track bar, synergy ball joints, new rubicon upper control arms, rebuilt my lower control arms, have a newer serious...

The cs003ra was what I was looking at and from what I read give about 2.5" of lift after they break in. What I'm worried about is withe the bumper/tire carrier and skids along with a future roll cage it would be too much weight for the medium springs. From what I've read the hd springs give...

My question is almost two part. I have re springs that have seen better days so would like to replace them. I have also added rough country shackle boxes and gained just over an inch of lift. My current springs are 3.5 and what I would like to do is lower it an inch that I gained. I was looking...

thanks for the reply. I have an arb cover and the carrier is stock. Ill make sure I check it for cracks. I should probably pull it out and check the locker over also. Stronger axles? Should I get chromo axles or something else? I would like something stronger but not strong enough to make the...

I have a 98 auto with a 4.5" lift on 33's, with front and rear lockers. I just put a aussie locker in the front this past weak and whent out for the first time of the year at slade ky. While out I broke a passanger ujoint which ended up tearing the ears off the drivshaft and outer shaft. Now my...

I had looked on your site before you posted but didn't see the rod ends for them. I try to keep the vendors in mind that's why I have your steering and a lot of jcr offroad parts. Also I live so close to a summit I usualy get my parts the day after I order.