Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to the new NAXJA Forum!
If your password does not work, please use "Forgot your password?" link on the log-in page.
Please feel free to reach out to [email protected] if we can provide any assistance.
While re-installing my clutch fan, I poked a hole in one or two of the fin tubes. Can this be fixed? or am I gonna be replacing the the radiator?
Thanks
I have a 96 (auto and A/C) with the 10-blade (straight blade design) electric fan that needs replacing. I see that the ones listed (Team Cherokee and RockAuto) for my year are 6-blade design and the '97+ 10-blade has curved blades.
I understand that the '96 is a weird tweener year, with a...
Tool recommendation.
Check out the Lisle Spill Free Funnel.
http://www.amazon.com/Lisle-24610-Spill-Free-Funnel/dp/B001A4EAV0
It attaches like a radiator cap and provides a new high point in the system. I found it helpful for burping the system.
And a question.
I've replaced the PS pump, gear box and hoses. Fluid level is good and there is no sign of bubbles in the reservoir. Why am I still getting some moaning while moving the steering wheel?
A couple of data points. (96XJ 2"lift)
. I had no issues removing my pitman arm. I gave it a couple shots of PB blaster, went to the parts store, returned, and went to work. 33mm socket for my pitman arm nut. I started by tightening the nut as far as my impact wrench would take it...
No, this was not. But thanks for the false accusation. I have no affiliation with this or any other fuel injection cleaning business - or any other automotive service for that matter. I'm not even sure how you picked up from my post that I might be associated with it.
But for the effort...
. . .or you can have them professionally serviced. They can then tell you if the individual injectors need to be replaced. Another forum recommended http://www.cruzinperformance.com. You might give him (or a similar shop) a call and see what they can do for you.
For an explanation of their...
Resurrecting this thread.
My XJ has a BPI Trail Tuff front bumper that uses the forward holes (3 on side, 1 on bottom of "frame") for mounting. Will that interfere with the mounting of the reinforcements such as JKS, TnT, C-ROK?
Thanks,
David