Recent content by reverendspence

Awesome, I'll go look for some of this stuff tomorrow.

I bought some pinion angle shims and unfortunately, the pin that's in the leaf spring doesn't go all the way through the shim down into the perch. It only goes through the shim. When I went to find something to alleviate that, all they had were REALLY long bolts, not centering pins. Is that what...

Call up a Jeep dealership and ask for a build sheet. My local one did it over the phone and e-mailed it to me. (Don-a-Vee Jeep in Placentia, CA).

The kit I got also included shock mount extenders so that's not a big problem either.

It's a '99 with the ChryCo 8.25" axle. I replaced the u-joints about 3 weeks ago before I did the lift so they're still new. I had the vibe before, but not nearly as bad. To jawa2021, did you retain the shims after you did the SYE? This is probably going to sound terrible, but are shims...

I bought a shackle lift kit with spacers for the front. For the back, the kit only came with a 1.5" extended shackle and then 1/2" leaf spacers. I decided to not use the rear spacers and just went with the 1.5" shackle extensions out back and 2" spacers up front. The vibration is so bad, my...

Ok, so... I installed the u-joints and the vibration is still there. I installed both the one that connects to the diff as well as the one connecting to the yoke for the tc. Any more suggestions? I sat the truck up on the jackstands, started it, and let the wheels roll to see if maybe the...

Thank you all so much. I guess Imma be orderin' me some u-joints!

Eeek, I don't know if they've EVER been replaced. I bought the truck about 3 months ago with 125k miles on it.

I installed some new OEM HD rear leafs on my 99 XJ and NOW I have a vibration. I had the tires balanced before I installed the rear leafs so I don't know if that would be the problem. The only other thing my mechanic said might need replacing in the near future is the trackbar. The vibration...

I have a '99 and I had a wobble between 51 and 58. My driver's side wheel hub assembly was cracked. Replaced it (at far too much of a cost) and there's nary a wobble now. I also had the tires balanced, but I was told the balance may have been thrown off because of the wobble.