Recent content by Puddin99

My ham club is starting the ham cram this fall again starting Sept 15th (third Sat of the month). If anyone is interested, here is a link to signup. You study (cram) for the test and then we give the test in the afternoon. https://carahamcram.eventbrite.com Let me know if you have any...

We had a good turnout for the last session. 19 people walked away with passing the tech exam. https://www.eventbrite.com/e/ham-cram-amateur-radio-study-and-amateur-radio-license-examination-session-tickets-39024149281?aff=erelexpmlt

Hopefully some others will chime in with their answers. I usually run both, but the advantages of a 2 meter rig so outweighs the CB/GMRS radios. Clarity (sound quality), smaller antenna, more power (longer distances), option to use repeaters. Yes, it does require a test, which the ham cram...

The link is good for all of 2018; we do one ham cram once every month. Ken

Let me know if there are any questions. I help run the ham cram and a VE to give the tests.

Did you ever want to get your Technican or General amateur radio license? Now you can do it in one day! https://www.eventbrite.com/e/ham-cram-amateur-radio-study-and-amateur-radio-license-examination-session-tickets-39024148278?aff=erelexpmlt We give these sessions once a month and are...

I have not heard back from Scott. The scrapper pushed up the time to Wed AM. I can try to pull the steering column and wiper motor in the morning. Any tips would be great.

I PM'd you. Ken

Wife rolled the 94 XJ. If anyone wants anything off of it let me know before I call the scrap guy this week. Engine 4.0 - ran even after the roll. It was high mileage but would be great core. Make offer. Already pulled. NP203 - Worked great before the roll. Make offer. Still connected...

Refer to the pic. Left is old. 157 is the set match number. Right is New. 188 is matching number. How to decipher starting pinion shims. Old looks like 1-7. New looks like 4.311. Thanks Sent from my iPhone using Tapatalk

The issue ended up being the oil baffel was too thick - by changing it to a shim half it's thickness I got the above pattern to run. Tomorrow I'll go get a thinner oil slinger less the difference of the oil baffel/shim and that should be it. I want to thank everyone who responded to help.

Think I got it. .10 BL. Sent from my iPhone using Tapatalk

Thanks for the reply. I'm not ruling it out taking it to someone, I realize that I'm not an expert, but I thought I would give it a shot and learn. I'll have to find some pinion shims as my kit only came with preload shims. I'll need to get a thinner oil slinger and shims. Is it suggested I...

I took everything and put it on the ring side but it still seems too deep. I confirmed that the carrier break is correct. However I am using a carrier from a low pinion in a high pinion. I did not see any differences from carrier with that respective. I'm at a loss. Thanks for replies...

Is this still too deep. BL .008 Not sure where to go from here. Does the pinion need less? I would need to find a thinner oil slinger. Yes? Sent from my iPhone using Tapatalk