Recent content by mountainjazz

Hi Urban Yan, Congratulations for your cool conversion. I need only the foglights. At suvlights.com they don´t have the foglights, just the headlights. Do you know of any other place where I can find them on the internet? Thanks in advance Here are some pics of my HID kit Here are some...

Hi Gary, The wheeling here is fine! about 1 hr from the city. It gets better as you get further away. The fishing people get Pavón, some sort of bass, the nearest about 2 1/2 hrs from here. About the caster, you mean start from stock arm lengths and then increase lower length 5/16" ? Thanks &...

Hi Would appreciate it if you consider a couple of questions here: Gary, Is that 5/16" lower control arm extension from stock a recommendation for a specific amount of lift? How much lift do you have? Is that good for my 3 1/2" lift too? Tim, Are those stock control arm length figures ok for...

Nightmarish situation: too many options. I've checked out the JKS and those are I think the finest, although not bent in order to overcome the coil/shock base edge. You can see in their pic that there is almost an interference issue just over to the right of the "PN 6100" text...

Yes, no rock crawling, only steep dirt (uphill/downhill) with eventual 10" rock on one side to climb over and uneven turns. Away from Caracas so you need a high level of reliability for the highway trip back. Have any pics of those arms you built?

Stock uppers + fixed extended length (tailor made for 4" lift) lowers such as the ones in the pic?

Hi, I raised my 99 XJ 3" front with 2 1/2" spacers + extra stock rubber pad, 3" rear with add-a-leaves + greasable shackles. Extended the sway bar rods because of the bowing coils problem. The stock control arms wore down the bushings because of the tension, being too short after the lift...

Has anyone done a mod consisting of replacing a stock power steering fluid reservoir with a remote one (aluminum cylinder), keeping the stock pump? The reservoir on my 99 Classic 4.0I XJ is leaking and I can get a remote canister from a friend's swap. I don't want to replace the pump which is...