Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to the new NAXJA Forum!
If your password does not work, please use "Forgot your password?" link on the log-in page.
Please feel free to reach out to [email protected] if we can provide any assistance.
This is my first rodeo... so when you refer to "factory inserts", what are you referring to? Does the gasket kit come with Felpro "inserts" which are inferior to the "factory inserts" ?
Also, the reply which referred to "the metal cuppy thing" being too thick causing a poor seal, what part is...
THANK YOU ALL for the great replies! I appreciate the various experiences and perspectives! I will verify the Felpro Gasket number in the kit I got to be sure that it is the same as mentioned in replies.
I have a 1996 and 1998 xj w/4.0 motors. I have them both out being rebuilt at a local machine shop. I supplied the gasket set from Felpro, but the rebuilder said he prefers the VALVE COVER GASKETS to be OEM, as in his experience, the Felpro ones leak. I said that the OEM ones leak and I would...
Thanks techno1154! I did buy it used, I don't think anything was changed by previous owner, I have found many things that are "a little different" from USA Market XJ's and the Haynes Manuals, event from the UK XJ Haynes Manual.
I will try with the key in the AUX position and see if that works...
But mine DID run after shutdown for a few days and occasionally. That suggests that it is made to, but is not functioning properly. Many vehicles do this by design. How would you or I know if the 1998 XJ for UK market does or does not? If it does not, then what causes mine to do so occasionally...
I have a 1998 XJ 4.0 (factory right hand drive from Scotland). It's temp gauge is in Celsius so it reads 40 at far left(cold), 100 at center, 125 at far right (hot).
It typically runs at or just below 100, which is 212f (boiling point of water).
On a warm to hot day it will sometimes go over...