Recent content by Johnny O.

I don’t have a locker and this is just my theory so feel free to correct me if I’m off here. I was thinking about getting a locker and getting rid of the disco in mine and after looking at the system I figured I would feel the locker and hear it ratcheting if I were to get rid of the disconnect...

I patched mine with JB Weld several months ago and it’s still holding.

By intake I assume you mean where the air comes into the air filter and not the intake manifold. That isn’t injecting air into the exhaust. It’s drawing air from around the exhaust. It doses this when the engine is cold to get warmer air. When the engine warms up a valve closes and the air come...

Look here- http://www.naxja.org/forum/showthread.php?t=912711 Be sure the leak isn’t somewhere under the hood before you go messing with the evaporator. If you open any of the lines you should pull a vacuum on the system before refilling it.

I taped a string to the front tire. Stretch the string to the rear and tie it to a jack stand or something. The string has to just touch the front and rear of the front tire but not bend coming of the rear of the tire. Then measure the distance from the string to the tire at the front and rear...

Ok, that makes sense to me. Thanks.

you need to straighten the passenger side wheel. Adjust the tie rod so the toe is correct on the drivers side wheel Then use the collar at the top of the draglink to adjust the steering wheel position. The collar at the top of the draglink will not affect the toe adjustment. This is the way I...

Yep. That’s what I meant. I did most of my work on homes, that’s why I have that R-22 stuck in my head. I never meet a car that used R-22

This is true! But I think the can comes with a fitting that will fit the low side only

“There are different fittings for different types of refrigerant” It is true that different refrigerant systems have different fittings. If his jeep had had R22 as I first thought he would have had to get the conversion kit that comes with adapters to fit the 134 hose to the 22 fitting on the...

What Paradise said. Is the drag link bent?

I haven’t done my Jeep but my 93 Chevy came with R22 so your 91 xj probably had R22 as well. Even though your gauge says 0 there is R22 refrigerant left in there. The refrigerant isn’t consumed it is just cycled though the system over and over so if it is low their has to be a leak in the system...

Maybe you could make a T-case drop for the time being and use the same cross member just to line up the drive line.

Dang ya’ll got worked up quick! Stop and think about what you said….if one looses traction the OTHER one spins? No the tire without traction is the one that’s spinning. So just like old man said….both wheels are no longer able to get power to the ground. 1 wheel with traction & no power + 1...

It’s just rusted on that spot so get a buddy to help by holding the lever inside the cab. You grab the bottom lever with some channel locks and work it free. That bushing on the right side of you pic needs replacing but mine looks like that too and it works. You could also pop that part with the...