Recent content by JerryV

Hey Jeff, I picked up the 45's and 90's that I used on my sliders at a local plumbing supply shop here in town.Schedule 80. Should be a shop in Wausau somewhere. Jerry

Does it spit and sputter when you try to pick up speed to fast or step on it? I had the same problem and I changed the hose and it fixed the problem. The hose on mine was really obvious that it was leaking by, it had large cracks. HTH, Jerry

If you don't have a steep driveway, just push it out and block the tires .

You will need to put the front brakes back together if you plan to use the brake pedal to stop you. If you don't it will spit the caliper piston out along with the brake fluid.

Would it be safe to say that that is the first rear shaft that you broke in that axle? I am not sure that is why I am asking. It seems from talking with you it was. If that was the case it would seem it has served its time. To bad it did all that damage in the process. Seems that Fixing the ARB...

I will not be able to make Apple Valley. I was hoping that the upper wasn't two pieces of tube butted together and welded. :hang: I do have a threading connection and that would not be a problem. Price is right too. Jerry

Looks good Jeff! Can't wait to see it up close and personal :-) Jerry

Sounds like its time for a brake job. Jerry

A few inches can be gained by moving the bracket that the two cables split from. Check it out at www.madxj.com in the tec. section. Jerry

Nope, You can't link to a yahoo album.

I have the same problem with my '99. For the most part I have just learned to ignore it. I have noticed if after filling up the tank that if I CRANK the cap down it will go away. I did have Auto Zone pull the codes. They told me it was the rear O2 sensor. I didn't change it though cuz' I...

I'm in appleton....Where ya at? Jerry

Quick Question? I have a home built hitch that uses the main bumper bracket bolts and holes for mounting.What does the manufactured hitch hook to? I would think that the hitch frame would sandwich between the frame and bunper brackets. Just curious,haven't seen a manufactured one installed...

Front Bumper??? There should be a couple bolts on the top and bottom of the bumper that mount the bumper to the frame mounting brackets.When removed the bumper will pull off. Once those are out the bumper brackets should have three bolts on each side. There may be a couple screws that hold...

I'm in Appleton. As Bloose said, the Pipe Line and Mc Caslin are about it for public land. There are however lots of places that have good wheelin'. The best way to find them is to get into one of the clubs in the state. That will open up your options a bit. PM me if you want/need any info on...