Recent content by gregruot7

4 BFG Km2 33x12.5x15 T/A Mud Tires Basically Brand new with 2k miles and virtually no wear. $800 or best offer Craigslist ad with pictures- http://nwct.craigslist.org/pts/3202817132.html Located in Torrington CT 06790

These were the stepe I took 1: Leave windows up 2: unhook wiring from inside kick panel 3: remove door helper pin and just jam the door helper into the door 4: cut hinge pins in half with dremmel (heavy duty cutting wheels) 5: pry whats left of the hinge pins out with breaker bar 6: get 3/8...

okay so I just tried the center bolts and they are definitly too long.... Hardware store bolts will really work? Aren't leaf spring center bolts unique? Safety is my top priority, because this is a DD

I wish, there is only enough room for the bolt, I took those brackets off of an old steering stabilizer lol!

I got rid of the bushings up top and got a shorter bolt like a few of you suggested.... It clears while sitting on the ground now! But It still clunks while going over bumps and it's rediculous, I'm going to cut it shorter and weld it back I guess, that's all I really can do! Thanks and if...

so cutting an inch out and welding it back up should be cool?

should I just cut an inch out of it and weld it back together? I don't know how long these things should be.....

I just got finished with my 3" lift on the front and ran into this little problem. The bolt up top is hitting the body..... I'm guessing that either it isn't the right sway bar link or I rigged it up wrong, I used home depot bolts for the top... Would it fall down lower and rub if I got a...

Yeah good idea,how much lift do MJ shackles give? like 1inch? and are they any good on flex?

wait so using washers is a bad idea? I was seriously about to use washers O_o

:wave1:sorry for posting so many threads lately, but I am putting my lift on tomorrow and don't want to mess this up. So I go my s10 leaves cut up and i'm ready to put them on tomorrow:firedevil I just don't know which order and how many leaves to add because I don't want to go over 3.5 inches...

THANK YOU blazinjames Wish I thought of that....:roflmao:

These are my 2 leaves i'm using for a bastard pack This is the center bolt I got at a local auto parts store, this is the only length they had.. My question is, will I need a shorter bolt that has the threads closer to the leafs? It will be a 4 leaf pack using the Main Xj, Then Main s10, then...

Picked up some leaf spring center bolts! Once I cut the spring eyes and straighten the leaf clamps so I can drill them and put a bolt throught I will start my lift.

Just Posting for before and after lift pic.... It will be going on this week or next week!