Recent content by CUJeeper

Ok so i am and engieering student and i am trying to get some extra credit. There was a question asked in my materials class about Cryo treating axles. What does that do to them. Make them stronger? Last longer? I figure this isn't really OEM stuff so i will post it here. So yeah if you...

Ok so i am trying to test my ignition switch to see if it is in working order or not. I have a 91 limited XJ with a tilt steering wheel. I can't figure out how to get to the switch or hot wire the car. I either need a way to get to the switch without pulling the steering wheel or a way to hot...

Would that also be the cause of the power locks and dome lights not working?

I will third the CPS. I had same situation and everything CPS fixed it right up

Its an auto sorry about that

I have a 91 limited xj w/ about 147k on it. So when i open my door i have no dome lights or power locks. And when i turn on the key I have no clock, radio, headlights, fuel pump or crank. The only electrical thing that seems to work is the brake lights and the hazard lights. In the days...

No the fuel pump is not on i cannot hear it charge up when the key is first turned on. Yeah i didn't know what a renix was just saw it talked about on here. I don't think i am getting feul but i am going to check that tomorrow. I will also check the coil wire thanks for the advice. I dunno...

Ok this is a weird one. I have a 91 limited with about 145k on it. It will not start. It will crank but will not fire. I changed the ecu about 500 miles ago. I believe I have the renix throttle but am not sure. Anyway when i initially turn the key i normally can hear the fuel rail charge...

Hey guys I have a problem with my 91 limited ( 141k) I will drive it for a while and when it is hot the engine will shut off. Most of the time with a little enthusiasm it will start but sometimes it won't and i will come back in an hour or so and it will start and run just fine. A couple of...

ASATxj, On my 91 I have the switch also. The wiring was in place and was already wired to the front of the car. It probably has the factory harness on it. I cut the harness off and wired the new lights into the wiring just by splicing them together. As far as the wiring diagram I know that...

Thanks for all the help you guys are awesome

How hard is that to do. You said bell housing-does that mean engine removal?

Ok this might take a while so hear me out. I have a 91 limited with about 140k on it. After it has been running a while or it is hot it will die. It will usually die when I am coming off the highway or sitting a stoplight but it is starting to do it when i am driving. Just the engine will...

Speakers I have 5 1/4" cerwin vegas. i think they come with the biggest magnet that you can get. They sound great but don't fit in the back. I had to put in rubber spacers so that the magnets would not hit the back. I then took off the jesen covers and cut out a circular hole in the panel...