Recent content by Comanche Devil

Yup 39psi sorry for that didn't proofread befor sending. Anyhow if your not getting enough fuel pressure it will be leanand fall flat after takeoff.

What about fuel pressure. Your post says stock Renix fuel pressure regulator which is 31psi, those ford 24# injectors need 49psi to flow correctly dont they?

Thanks That part was already done before I got it. Keep an eye out on this thread in a while (couple months) Im making the lower rear hatch section slid out (except the taillights) like a drawer. I got 2 - 200lb drawer slides that it will slide out on and it will have an lightweight basket...

OK Here they are what you all been waiting for (well at least me anyways) The money shots, poser shots or whatever shots. Its all done except a new windshield (Installed Thursday afternoon) rear window and registering and MVI all Thursday. So you know what that means Roadworthy for Friday. All...

Hi all Thanks for the help. Cherokee is fixed and running fine. It was the dist out of sync to crank sensor. Just ground off the locking tabs and advanced it .040 and its working perfectly, lots of power and scanner data is bang on far as O2 readings and short term fuel delivery, map readings...

Yee Haa Found and fixed the problem myself. Turns out the distributor was out of time. You cannot install them straight up I had to grind the lock tab off and advance the dist about .040" to get rid of the Skipp. Now it runs really good.

Yes also replaced spark plugs. added so much to list forgot to add plugs lol

I have issues. NEED HELP The Cherokee works like a dog. It idles OK but upon tip in throttle it skips badly and backfires through the exhaust. Full acceleration it revs OK as well. Its a renix system and I changed a whole bunch of stuff to eliminate components. The stuff I changed are...

Yee Haw Christmas came early to me :greensmok lol. Got my new wheels today. They are American Racing 15x8 with 4" backspacing. Fit good and I thing it makes the Cherokee look pretty good. If I do say so myself.

Thanks for the tip throttle. Allready did this except I used Krown instead of WD-40

Some new pictures for you all. Towed the Jeep back down to work so I can install exhaust and other stuff that I would need the Hoist for. Removed my front bumper that I made, from the Comanche and installed it on the Cherokee. I wish when I built the bumper I took pictures of that build but I...

I'M SO EXCITED. :clap: I got the beast running tonight and drove it out of the garage for the very first time, and under its own power instead of pushing it so I could clean the garage. (I never started it before this, now you can see the excitement) It's got no exhaust so it sounded good. Also...

Hello all who's interested. Tonight I got down to the nitty-gritty and ran new brake lines to the rear and over the axle, and to both front brake hoses. Installed new wheel cyl, shoes, hardware and drums on the rear. The front got new calipers, pads and rotors. Installed the front shocks as...

I like carpet, its warmer in the winter and its less noisy inside the cab.

Ok here are the pictures of the interior completely installed and cleaned. I used Maguires interior and carpet cleaner and lots of Armer-all. What a difference, to see the change go back to the previous pictures to see the differance. I think it turned out really good...