Cherokeedad2's latest activity

I've been looking up some diagrams of the vacuum system and, I didn't realize how extensive it is. Definitely not the brake booster...

I haven't run a compression test, as it runs great over 2,000 rpm But, the vacuum angle is probable. The front vacuum connection has a...

Forgot Tested fuel pressure - perfect

At Tim's suggestion, I got a new Dorman TPS and installed. No change To summarize: Idles like a dragster Poor throttle response up to...

Ok But, the factory spec at idle is .25-.95 and I'm at .7

See post #9 Tested the TPS and it's within range Leak tested the TB and it's leaking badly around the shaft. Removed, disassembled...

Thursday update Pulled the injectors, cleaned them and reinstalled with new O rings Better above 1500 rpm, still wants to stall and...

Tuesday update I pulled the plugs and cleaned them. Odd results, most were dirty on one side, two were dirty all around and #4 was...

TPS tests good - swept from .7 to 4.0 + Haven't tested the CTS It indicates as usual on the gauge Replaced the AIC - no change

Monday update Since it was idling poorly, but felt much better over 2,000 rpm, I pulled the AIC and cleaned that. Idle issues decreased...

Update I checked the O2 sensors connections and they are ok I checked the O2 fuse with my VOM. And it's ok. Left the battery cable off...

The problem is, it wasn't showing any codes So, off to YouTube, found a similar condition in a video that was caused by O2 sensors. So...

The 98 4.0 suddenly started running rough and wouldn't idle/ it would die Like, went to the store, ran fine. Came out, issues As this...

It came home today, showing these codes P0700 generic P0705 trans range sensor circuit P0715 input shaft speed sensor circuit P0756...

Yes, it's had regular fluid changes I haven't dropped the pan as yet. Fluid is clear at the dipstick