Recent content by cher96

What make truck, year, and model would give me a 4.27 or 4.56 gear ratio, have the pumpkins in the correct positions for an XJ, and would not be excessively difficult to swap in if all I had to do was weld in the associated mounts and so forth. I have been ill the last couple of years and wish...

I am so very sorry... it has been a while since I have been on this Forum. Had medical issues. Take another set of XJ leaf packs from another XJ and use the main spring and cut off at each end just before the eyes. This will support the main leaf springs, use the 2nd & 3rd springs from donor...

For 2.5 to 3" Bastard Pack. For 4.5 to 5.5"s of lift in the rear, I would suggest: XJ Bastard Pack/XJ Bastard Pack with Shackles Take your XJ leaf packs and find another set of XJ donor packs and use the main spring cut off at each end at the eyes to support main leaf with bushings, 2nd & 3rd...

I have put a lot of thought and have done my Research on this. My Budget is $1500 for everything in this List Shipped to me. Front Bumpstops Coil Springs Control Arm Drop Kit Adjustable Front Upper and Lower Control Arms Drop Pitman Arm Front Adjustable Track Bar with Double Shear Adjustable...

Bumpity, Bump, Bump, Bump. Still need advice. Thanks.

Give Andy (Iron Man 4x4) a call at (704) 796-3502. He will fix you up. He fabs them order to order and will customize them to whatever a person needs. Sometimes he is so busy and can not hear the phone and sometimes his phone message box is full. You just have to keep trying. He is awesome to...

Since you Weekend XJ Warriors are now on... Maybe you have some suggestions I could use. I want to find the best way to mount these Iron Man 4x4's Long Arm Radius Arms within the my XJ's frame rails? I have run with Short Arms so I have no idea. A RE Crossmember was suggested as well as a...

They should be measured Center Hole to Center Hole. Hope this helps. 4" LCA - 16 3/8" UCA - 15" 5" LCA - 16 5/8" UCA - 15¼" 6" LCA - 17" UCA - 15½" 7" LCA - 17 3/8" UCA - 15¾" 8" LCA - 17¾" UCA - 16" 9" LCA - 18¼" UCA - 16¼" 10" LCA - 18¾" UCA - 17"

Here is a previous posting on a different thread. Hope it helps.

As a lot of Jeepers have posted. Add A Leafs usually do not last for long. Best to go with a Bastard Pack or some BDS Leaf Springs IMHO. My Add A Leafs flattened out and I am doing a Bastard Pack next week when I get my new Iron Man 4x4 Extended Super Shackles. As for the Iron Man 4x4 Extended...

jonzer12, I see your location is Canada. I'm sure anything would Rust Up in the great white north, especially in Canada. When I lived up north, where they salted the roads in the winter, new cars would be Rust Buckets in about 3 years. Floor boards became nonexistent. However, that was 25 years...

I see what you are saying. Thanks. I stand corrected. It appears that Andy's, Iron Man 4x4's, Bushings are much better since they are tapered.

Here is a Larger Photo of Iron Man 4x4's Long Arm Radius Arms if that would help. You can see the Tapered Bushings and Flex-Joints better. Since some seem to be worried about his Bushings on other threads. Here are BDS Bushings BDS uses in their Kits. I believe he said he orders his Bushings and...

Thanks. A couple more questions everyone. What would be the best designed custom crossmember to mount these within the frame rails? If you have something previously posted up... please post up the thread. Thanks. If you have an idea to share... post that up, too. Thanks. Or, besides the RE...

I just ordered a TC Skid Plate from him 5 days ago through PMing him. He said he was getting a bunch of skids fabbed up. I'm not sure what else he has. Here is his vendor thread: http://www.naxja.org/forum/showthread.php?t=1003548 Hope this helps. cher96 Vicki