Recent content by Bronco

Almost got everything buttoned up last night with the help of a friend but ran into a snag. The dang thing would start. It will crank and I can smell fuel. I just wont catch. What is the deal with the CPS? If it is not getting a signal does it set a code. I have no codes being stored. Is there...

Thanks for the ideas. At least I have a few ideas on how to move forward. Here are a few pics of my broken for fun. Full size pics are here http://www.markashurst.com/Jeeps/98Clutch5-12-13/ All out in one piece... Dont think it will go back in that way... Broken clip How the fork fell past...

I now have the Tranny, T-case and both drive shafts all together and out on the floor. Once I won the fight with the center console getting the sifter out was easy. I'll be replacing the front shaft seal on the tranny while I'm in there.Thanks for all the help guys. The failure turned out to be...

Thanks guys great info. xpedition xj-eh! that link does have a bunch of good tips. Thanks kastein so it sounds like I could do the twist off trick rather than taking the four bolts off that hold the tower on? Is that right? I'll have a look at that when I get home tonight. I have the E12 So I'm...

I am in the process of dropping my tranny to do the clutch. I can’t figure out how to get the shifter off and I got to wondering if I even need to? Also what is the best way to get the inner boot off some of the screws are not very accessible. Anyway I guess I need any tips for how to get the...

98NWCherokee for the win. Tim for second. I don't know if the hit caused it. Hard to say but the CAT code came on yesterday. The loss of power has subsided quite a bit... stuff must have moved around some more in there. New cat on order. Thanks for the help

So what acts like a pinched pipe but dose not look like one?

Ya that is really what it feels like but: 1) I had a big hitch still in from moving a trailer around this weekend so I don’t think she came anywhere near the bumper. 2) My tailpipe is trimmed up nice and tight like WB9YZU suggests to keep it out of the rocks and such. 3) I have been under...

This morning I was hit from the rear while slowing for a light. I was not a hard hit really. The other driver sped off with a print of my hitch in their honda. I got out and there was no visible damage but once I got going things were not right. I can hear an exhaust type hissing sound and at...

OK thanks.

I would like to post a similar thread to below on NAXJA but as it is a bit of a strange deal where I am selling something but not really for profit and certainly not commercially. I'm not clear what rules would apply. Also if it is allowed where would be best...

Well the make it go back ons have it. I had a guy weld it back and add gussets to both side for $60. I'll see how it goes, but as of now its better than a few days of wrenching to swap the housing. thanks for the help

Thanks for the link I had not seen that product. Looks like a fair price. Anyone have experience welding them on. How much do you have to tear down to get in there and weld?

So I noticed some funny handling and on investigation I found this hanging from my Sway bar link. Clearly it has been cracked for a while and finally let go. I thought about welding it up but the way it's broken and with all the stuff around it so close I don't have very high confidence that a...

Are the other bolts in the housing the same? Its strange for the bolt to be the part that strips.