Recent content by bmikes

Oh yeah, been rolling for a while. Still having a little bit of a heating issue but it's not bad. Got my shackle relocators in a few days ago, man what a difference that makes. Headed out after work today to wheel browns for the weekend. So stoked!! haven't been to tsf since trophy challenge...

Well a lot has happened lately. I took the motor out of that green jeep and put it in mine. When I did that I went through and did the valve cover gasket, rms, oil pan, oil filter adapter, intake/exhaust, and put a not cracked header on it. Before I got that mated up and put back in I made...

Getting good at this motor pullin stuff...

I've never had a problem with mine and been wheeling them locked for like 3 years

Just something I made for it. I've seen aftermarket spacers and decided why not combine the spacer and the reinforcement plate. It's 10 ga plate with spacers I made to match the thickness of the stock spacer.

Just the daystar extended bumpstops. But I turned some aluminum to go inside the coil and sit on the coil pad to take up some more space.

Oh and this lil guy is an addition to the family for a bit.

Whats up guys? Been a while. Been doing a little work lately. This is what the Jeep looks like atm.

Got my wiring done. I chose to buy the supplies and do it myself rather that go with Kelleys or a similar kit. I replaced all the battery cables and other cables that Kelley sells with 2ga fine strand welding cable. I got a steal on it and bought 20' (10' red, 10' black), a heat shrink set, and...

It looks like almost 1/8th inch plate so I think itll.hold up

I'm a little worried about thr tcase skid, if I came down on it hard what would happen. But I've got too many other projects to worry about right now so modification of that will have to wait. And good to know Scott! If you can beat the crap put of it I feel comfortable :D

Fishing up all the little loose ends sucks. But those are things that help everything continue to go smooth down the road later on. Today I got a little more done. Turned my cross member 180° and put my tcase skid back on. While I had my cross member off I checked my Trans mount, it's still...

Did a little more work today. Got one item checked off the list of things to do before trophy challenge. Co2 tank holder. The bracket is bolted woth 2 bolts through the floor, 2 into the inner quarter panel where the factory mount goes. Then the tank holder I bought and modified has angle iron...

I'll try to make it but no promises yet.

Is the date set yet?