Black1990jeep's latest activity

idler pulley. lower coolant hose. had to replace both on trail.

120 psi is a bit much isnt it? that can be dangerous in a tire. Id set the shut off to a lower value

It is good practice to replace both gearbox and pump at same time, plus flush the hoses. Debris from a failed pump can ruin a gearbox...

What are the recommendations for brand and type of trackbar drop bracket brace? My drop bracket loosens up at the frame and ends up...

Hi all... I was at Pick n Pull in Salinas Calif. and got some 33 inch long ( roughly, bushing to bushing) lower control arms from an...

What do you all think of the CAVFAB long arm. It has a unique body side upper arm mount, the mount is rotated 90 degrees from the usual...

PS I am also at the point of considering trussing the D30, I need to regear anyway as I have 4.11 now. also considering front frame...

Hi Evan What brand of long arms you have, or did you make your own? What is your lift height, and are those 35 inch tires? How...

Now on the three link, can one simply install a four link set up and remove one of the upper arms to make it into a three link, or are...

I will likely have a hard bushing like a johnny joint or such on the body side, it looks like standard rubber bushings are usually used...

How big an improvement in articulation will a three or four link long arm give verses the short arms? (Note I have drop brackets for my...

I am looking maybe into long arms. I have a 1990 XJ, 33x12.5 MT tires, 6 inch lift, Atlas II transfer case, center frame stiffeners...

Fourth gear for 1990 and before of the AW4 is 0.705 ratio, for later AW4 the ratio is 0.75 , the output spline count also changed at...

I used this over flow tank...