Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to the new NAXJA Forum!
If your password does not work, please use "Forgot your password?" link on the log-in page.
Please feel free to reach out to [email protected] if we can provide any assistance.
What would make a np-231 out of a 96 cherokee with the 4.0 any diffrent than the rest?
My buddy has broken his t-case in his 96 cherokee and everyone i have talked to has told me that you would need one from this same year is this correct?
Still draging..................
Front are still not releasing from rotors. Could this be in the master cylinder?
The brakes work great but the front pads are not leting the wheels spin free
OK,
I took the calipers back off and there were some pretty big marks were the pads ride, I dont rember seeing them before. I ground them down flat, I know you are supposed to weld them in but i really did not have time tonight.
I also regreased the pins and contact patches were the pads...
I did pump the brakes untill they were hard with the car off then cracked the bleeders. They both did not spurt out fluid just trickeled out.
As for the pins i will check them and make sure they are not bent or groved and will re lube them with some brake pin grease....
98 cherokee non abs.
Both front brakes are sticking, I replaced both calipers rotors and pads about 5 months ago. I have RE steel braided lines on it also.
I dont think both calipers would be bad at the same time. What would cause this???????? When i put the truck on jack stands and try to...
Bump for best offer.
I did not build this jeep bought it from a fellow member on here.
I think he did a good job has had its normal issues but nothing bad
98 Cherokee 4.0 Auto 93000 Miles 5-5.5 lift
Maxxis Bighorn 33x12.5-15 About 13000 Miles On Them Very Good Shape
Slip Yoak Eliminator With Double Jointed Drive Shafts Front And Rear
K@n Filter
Rock Crawler 3 Link Long Arm Kit ,With Rubicon Express Coils And Springs, Rubicon Express Mono...
If you look cloce in the block it looks like a circular pattern on the left..
I have used tap water with a aluminum pump and heads never had anything look like that..
Dont reuse it.......................
I did not set up the gears so i am not sure on the specs..
I thought he had said 25 pounds but it not sure.
It is full on fluid and it does not have any type of locker its open( open diff)
The only thing i can think is the pinion gear is to far back into the ring gear and when it is under a...
Well my uncle installed my gears and we have a big problem.......
WE installed a set of 4.56 gears in my 8.25 and when we took it for a ride it has a loud whine on acceleration and a grind when you are going about 15-0. We have taken this apart several times and have replaced the pinion...
It is amazing how many people are ready to knock you for your grammar.....
Put some of that negative energy and help some one......
For those who did reply positively thank you.. I will be buying a Aussie today