Recent content by aardvark4x4

  1. A

    Mac 4x4 UK Challenge

    Completed the 2007 Mac 4x4 UK Challenge in my '91 XJ. Read all about it from page 10 onwards on JPFreek here.. http://www.jpfreek.com/
  2. A

    Disc Break conversion

    Do any of you guys know if the '05 Mustang rear dic brakes are a relativeley easy swap onto an XJ non C clip D35?
  3. A

    Issue with poor running

    Partially blocked Cat or muffler?
  4. A

    Brakes Vibration

    The recall had nothing to do with warped rotors. They were recalled because the composite rotors could possibly shear off due to excessive corrosion in states that use salt on the roads in winter. If they were only fitted in July, I reckon you could have a case for a warranty replacement on the...
  5. A

    D30 and 35- Why the most discarded axles on earth?

    I've been abusing my 4.0HO 5 speed XJ on stock 30/35s with 3.73 for 2 years on aired down 31s and the only breakages I've had were entirley my own fault. Exploded the spider gears in the rearend after the fourth full power attempt at a 1 in 1 climb with a big dip that launched the rearend...
  6. A

    Funky TPS issue

    '87 is Renix, '96 is Chrysler, they may not be the same. '93 on 2.5 and 4.0 will be wired the same.
  7. A

    HELP Xj dies then starts again.

    Crank sensor.
  8. A

    Tell me why this ISN'T a '96 XJ....

    I'd say that was pre '91
  9. A

    buying an 85 xj 4 cylinder

    I have an '84 4cyl auto, that has 3.73s. D30 front, non C-clip 35 in rear.
  10. A

    Dana 30 crush spacer

    I'm about to reassemble an '84 XJ Dana 30, which was originally built with preload shims. Can I use the more usual crush spacer instead? Most of the other 30s I've built have this and I can't see any other difference.
  11. A

    Wanted MPH speedometer for '88XJ

    Think we're sorted for now. (thanks W_HOWEY) but thanks for the replies, nice to know you guys are willing to help us out with partes from across the pond.
  12. A

    Wanted MPH speedometer for '88XJ

    My friend in the UK needs an MPH speedometer to fit his '88 Canadian XJ. It's a Renix 4.0 with Laredo package. The speedo is cable drive with trip meter. The one from the '84 2.5 I'm parting out doesn't fit. Either the speedometer on it's own or a complete cluster to fit an '88 would do. His...
  13. A

    QuickLoc for non C Dana 35

    It's on Ebay with no reserve and at the moment I'm giving it away! Located in UK, but will ship to US for $40 airmail. Have a look here.... http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=8072730586&ssPageName=STRK:MESE:IT
  14. A

    Another shimmy-wobble question/problem, I don't think it's DW though...

    They don't cause or mask shimmy, they're there to damp the hamonics which can build up from a single bump and escalate into the dreaded wobble.
  15. A

    Need axle help

    Pony, what about either using a TJ D44 rearend with fabbed brackets, or is there a chance that the TJ shafts and brakes will fit the Waggy rearend?
See more
Back
Top