75SV1's latest activity

Bored TB to 60MM. I'd also 'port' the Thermostat housing. The inside radius is more of a point. I rounded this up. HESCO 'CNC's' them. I...

Also, if you have an auto trans, then a trans cooler should help. Some of my XJs run around 205 to 210. At that temp it doesn't concern...

One of the members did an AW4 rebuild thread. I forget who. PHX???.

'Gonna be nice to have heat next cool morning, we'll see when it's hot if the clutch/shroud fix the "hot when it's hot" problem. It'd...

There are a lot of differences. The motor mount bosses are different on each side. Brown Dog makes a set of motor mounts for that. The...

Recheck the fuel pressure. Should be at least 45 PSI. I think the 2000 is more like 50 PSI. Also, get a NOID light. You should be able...

OK, I've done two of them. Also, redid one of them to a 5 on 5. I used Ruff Stuff's 1-tom GM cross over kit. Also, Rusty's OTK trackbar...

Put a white stripe crossing the hub and the ring. If that shifts, then it needs replaced. It might take a while for it to fly off. Its...

It's not the rings, I'd be worried about. Its the main bearings. Mine took out the main thrust bearing. A harmonic balance is about...

The Rotella oils, T4, and T-6 have about 1200 ppm of Zinc. I haven't used T-5. I'm sure it has the same.

Always different opinions on oil and filters. Not sure on the T6 though. T5 is a semi synthetic. I'd check the ZINC content on the...

OK, a few thoughts on why I went with the Ironman kit. I do have Dirtbound's. I'd say the main reason is it covers the underside. IE a...

I am having one put in. Well, both front and rear. I might be able to send pics either by phone or email.

I don't have an answer. Also, I don't know if just putting in the tires with the Liberty rims would work, with out adjusting the...

OK, I'm running a 265/70R17. So, 31.6 and 10.4 width. So, basically a 32 -10.5. So, same as you have. As before, I am using a WJ Big...