Recent content by 69fury

ordering an SYE today. Under $200 (porc, rugged rige, aa, other?) i need to go with standard, not super short as i want to use a front ds on my 93 5speed,8.25 two door. Np231. whose sye should i order? (no leaky- daily driver) 5-6" lift happening now....

Ron's the MAN! Got the physics on it! Good point about the center sleeve-I hadn't thought of it being under compression that makes me feel tons better about the whole process.

I'm not sure what you mean, for the upper and lower shackle mounts it will get new nuts and new bolts. the only thing i will reuse is the weld nuts in the front leaf mount locations- as they didn't break out. I'll see if i can find a tap to chase them out with. Thanks for the help-i didn't...

that's great to know- i haven't gotten the broken weld nut out yet, but saw the "pocket' it sits in for the upper shackle mount. I was concerned that a nut there would not support the frame sufficiently without really cranking the torque and siezing the shackle tight. if you put a washer in...

I've done a search and seen millions of threads about how to avoid this situation but not many on how to cure the upper shackle weld nut, and none on how to do it without welding Is there a strong, NON welding method to put a new nut in the frame for the upper shackle bolt to mount to? Using PB...

Re: tcase drop MOUNT Well i found out a little more about the tcase drop..... it seems that the crossmember (it appears to be stock looking, but this is my first XJ) has been reinstalled with the front bolt holes over the Rear crossmember holes in the jeep frame rails. Then new bolt holes must...

bump to the top for tcase mount gurus?

HEY, THAT'S HANDY! I love stuff like this, thanx. Any one able to chime in regarding the transfer case mount plate doowah-diddy thing?

I've got a 93Sport 2 door with 4.0, Ax15, 231 with d30 and 8.25. The previous owner put a nice 4-4.5" lift in front and an aal in back that took a sack. I'm relifting the back with a full pack, and will look into SYE (and maybe a 2 low kit). I have two questions and evidently cant get the right...

double post owns me.