Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to the new NAXJA Forum!
If your password does not work, please use "Forgot your password?" link on the log-in page.
Please feel free to reach out to [email protected] if we can provide any assistance.
I pulled the 99 intake today in about an hr so i think im gonna go for it. now if i find some cracks in the exhaust while im at it guess im gonna get a new header
I finally got my 99 manifold to swap on to my 98 and all of the threads I have read people use aftermarket headers. I know i should be upgrading my headers to match the manifold but I already got the manifold and currently do not have the funds for new headers. So the question is will there be...
thanks for the info
well so far i have 703 injectors, no cat, and a borla exhaust, custom canister hooked up to the snorkel with a 6" filter and 4" pipe (intake)
searched and could not find any info on this.
I was looking at swapping to a 99+ intake manifold and I can get a manifold from a 2006 tj that will be very cheap or free. before I take everything apart, will everything line up? are the heads different on tjs?
any info would be great
1998 xj, aw4, trans cooler and temp guage, 4.88s and 35s
For the last 2 days my aw4 has been slipping very bad in every gear after it heats up a little past 150 and slips more the hotter it gets When its cold it shifts fine and seems normal. About a month ago it had a bad od stolenod and i...
Still didnt hear anything on my order 3288107421, from 11/13/2010, just a little concerned, let me know. Also no status in the reciept. Dont mind waiting just let me know. Thanks.
I just got 5 grizzly wheels for $60.00 and I think they will look good on my xj. I have 31x12.5s and will be going to 33's later. how wide should I get some spacers?
I recently installed a RE 4.5" super flex with full spring packs in the back and the front is sitting lower than the back. I have my old 2" spacers and the shocks I got are rated to up to 6.5" lift. I will also be putting a bumper and a winch soon. can I use to spacers to level it or I will run...
I have a 1998 XJ sport and I was reading that the 2000-2001 models are distributorless. I have seen some newer models at my local u pull it. Is is possible to convert it? and is it worth it?
Is it possible to add a double cardent joint to a stock rear drive shaft and stock yoke? also what happens if you put a front drive shaft on a stock yoke? I cant seem to find the right u-bolt yoke for my sye.