Recent content by 00jeep

update: with the truck running I got 12v at 1 wire 5 at another and ground at 2. with what i did last night with the jumper i had both fuses and the relay disconnnected so there was no way it could back track to the pcm. that said i decided to go thru the test procedure for the P0500 VSS test. I...

ok so after i looked at it tonight I found that on the upstream o2s im getting 4.5v but at the fuse im only getting 8.8 mV?? I did some research on alldata and found out that the ASD relay supplies the heated oxygen sensor fuse (23) and the fuel injector fuse (20) with power. I tried four of the...

thank you for the suggestions I was able to use the solus at work today to take a look at things just as i thought the o2s are not switching. the other thing is on the scan tool the upstream was reading 0.89v which would indicate a rich condition. downstream was at 1.03v. I was messing around...

Ok so last night my truck stalled turning a corner. After I started it back up it seemed to only be running on a few cylinders. I thought it was the same issue i had with my old jeep with the PCM having a misfire cond. after heat soak. I parked it overnight night and in the morning started it up...

ok to start I bought a 1998 Jeep cherokee xj 2dr 5 speed It had a few rot issues, the rockers, little door rust and the one im most concerned about is around the rear bumper area. On the drivers side, where the bumper support bolts to the frame is rotted. to be more specific, its the part thats...

Thats what i thought from the picture i saw it looked alot like my jeep except older and with four doors lol

Hi I joined quite a few months ago but never posted anything. Took me awhile to find out how. Anyway, I had a few questions regarding a Jeep Wagoneer. Does it share the same drivetrain/suspension as the Cherokee? My mother has an opitunity to pick up a 1990 and was just wondering what parts I...