• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Jeep XJ/MJ Aftermarket Steering Wheel Horn

Francesco

NAXJA Forum User
Location
Ventura County
Hello,
I haven't found much or anything online about this, so I figured I'd post it. I put an aftermarket wheel in my 1990 MJ, and I have NO idea how to wire the horn up. Factory horn is a push pin/ground setup to honk it seems, and aftermarket just wires in using flat connectors. Do I need to take this farther down to get it to do what I want? Any help will be appreciated.
Thanks,
Francesco
 
I have a Momo wheel with a Grant horn button. It has the two prongs on the back, but my steering wheel has a rod that you can push in for the horn. I can get pics tomorrow. Do you have pics of your setup?
 
test your horn button to make sure its doing what you think. then test the wiring behind the pin switch with power supply.
 
Back
Top