Brassmonkey
NAXJA Forum User
- Location
- Boston
For sale is a complete set of solid steel bumpers and rock sliders.
1. JCR XJ Crusader front bumper (84-01 XJs):
https://www.jcroffroad.com/product/XJFC.html
2. Tomken XJ rear bumper (97-01 XJs):
http://www.mcssl.com/store/tomken/xj-rear-bumper-no-receiver
3. Tomken XJ rear bumper end caps (97-01 XJs)
http://www.mcssl.com/store/tomken/xj-97-01-steel-end-caps
4. Rocky Road Outfitters rock sliders - great design with kick out to push rig away from obstacles. Bolts to unibody and pinch seam for maximum strength.
The JCR has two D-rings and a 2" receiver, will throw in a license plate holder that slides into the receiver. The Tomken has two D-rings. The end caps are solid steel and tie into the rear bumper and the bottom part of the lower quarter panel. Everything is solid and well built.
Bumpers were ordered as bare steel and painted to match my XJ by a local shop. Color is Chrysler Flame Red. The paint on the front and rear bumpers are in good shape, but the end caps started to flake at a weld seam. Could easily be welded along the length of the seam, ground, and repainted. Sliders are powder coated with a small bit of surface rust at welds and drill points.
Metal is all in excellent shape - no dents or dings. Bolts have long been cannibalized for other projects. Rear bumper uses stock bolts, others can easily be found at the hardware store.
$450. Cash only.
I live in the Boston area, and I can deliver within 50 miles.
Message me to set something up.
1. JCR XJ Crusader front bumper (84-01 XJs):
https://www.jcroffroad.com/product/XJFC.html
2. Tomken XJ rear bumper (97-01 XJs):
http://www.mcssl.com/store/tomken/xj-rear-bumper-no-receiver
3. Tomken XJ rear bumper end caps (97-01 XJs)
http://www.mcssl.com/store/tomken/xj-97-01-steel-end-caps
4. Rocky Road Outfitters rock sliders - great design with kick out to push rig away from obstacles. Bolts to unibody and pinch seam for maximum strength.
The JCR has two D-rings and a 2" receiver, will throw in a license plate holder that slides into the receiver. The Tomken has two D-rings. The end caps are solid steel and tie into the rear bumper and the bottom part of the lower quarter panel. Everything is solid and well built.
Bumpers were ordered as bare steel and painted to match my XJ by a local shop. Color is Chrysler Flame Red. The paint on the front and rear bumpers are in good shape, but the end caps started to flake at a weld seam. Could easily be welded along the length of the seam, ground, and repainted. Sliders are powder coated with a small bit of surface rust at welds and drill points.
Metal is all in excellent shape - no dents or dings. Bolts have long been cannibalized for other projects. Rear bumper uses stock bolts, others can easily be found at the hardware store.
$450. Cash only.
I live in the Boston area, and I can deliver within 50 miles.
Message me to set something up.
