• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Montana Fab AW4 controller

bajabronco

NAXJA Forum User
NAXJA Member
Location
Reno, NV
I installed a Montana Fab AW4 controller over the holiday weekend. It should provide me manual control of 1st and 2nd gear. I spent the time to wire it in with 4 pin connectors, so if I need to I can simply unplug it and go back to stock. two 4 pin connectors coming off the new control module, with a power and ground bridge between the two. Two 4 pin connectors where I spliced into the stock wiring - two pins on each side for the solenoid 1 and solenoid 2 controller, and then two other pins on both sides for the ground and power. I'll report back how well it works after I do some more testing!
IMG_2374_Fotor.jpg
 
i put one in my 98 xj couple months ago , finally got to use it offroad this past weekend. works great, wish id done it yrs ago.
 
Back
Top