• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Spark Timing on a Renix 4.0

ok, got new plugs today, and removed the spark coil to clean connections.

My coil ohms test as follows..

neg. primary to highvolt terminal....4.88 k ohm
pos. primary to highvolt terminal.... 4.88 k ohm
neg to pos. primary terminals......... 1.3 ohm
neg primary to coil case.................. infinite, open.

I dont see in the factory manual what these values should be. are these values for the coil good?,


for the egr, yes it functions, I will check the egr solenoid at idle once I get the coil and wires reinstalled, and will check fuel pressure.


thanks!
 
Back
Top