• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

The Stupidist Jeep on the Planet

not too bad, so about 360-400 in materials for me. guess it's time to throw some pennies in the pickle jar.
 
Remember, when you're done with your cage and its all welded up nice. Go over all your welds one more time, with no shielding gas. Get em all nice and covered in booger welds. That way no one will think you ******d out and was afraid to roll again without a decent cage. Then when you roll again, on purpose, in typical Rob fashion, you still look like you're a friggen lunatic.
 
Remember, when you're done with your cage and its all welded up nice. Go over all your welds one more time, with no shielding gas. Get em all nice and covered in booger welds. That way no one will think you ******d out and was afraid to roll again without a decent cage. Then when you roll again, on purpose, in typical Rob fashion, you still look like you're a friggen lunatic.
how the **** is it that i know someone who is so ****ing itelligent? my mind is so blown away that im scared right now
 
or you could just do it my way and make the welds look awful right off the bat :thumbup:
 
or you could just do it my way and make the welds look awful right off the bat :thumbup:
where do ya think i learned how to make awsome welds, obviously carmelo has never seen my welds
 
got both b pilliars tacked in place, along with the drivers side d pilliar and a brace, hope to get the pass side d pilliar and brace in tomorow

00145.JPG


00425.JPG
 
made another cowl bar, along with harness bar, and x bar, everything is also welded up, all i got left is a couple of harness mounts and gussets

524271_4005867978089_2109639501_n.jpg


00426.JPG
 
cage is 100%welded and painted

0099.JPG


also made a mount for my hi lift, its a highly coplicated combonation of 1/2" bolts welded to the cage with wing nuts

017.JPG


took the jeep for a ride, the cyclist behind me failed to see my brake lights

00427.JPG
 
all put back together again, goin wheelin this weekend for the first time with a cage, should be interesting, cant wait

527101_4031578460835_33581345_n.jpg
 
wasnt able to test the cage, i just slid down shit sideways, the cog should go up a little in the next few weeks, as it was the last trip for the 38's

393500_203301079801523_625186484_n.jpg


2012-09-09_11-01-15_941.jpg


399135_4062298108807_921563584_n.jpg
 
wasnt able to test the cage, i just slid down shit sideways, the cog should go up a little in the next few weeks, as it was the last trip for the 38's
399135_4062298108807_921563584_n.jpg


this some kind of weird jeep porn?

or did someone take the "you can kiss my a$$" idea a little too far?
 
borrowed a couple 42" Rockers from a friend, looks like the Jeep will be loosing some sheet metal tomorow

400773_4113690953596_433569184_n.jpg
 
Back
Top