96 light roll over part out

I just picked this up today and before I got home most of the drivetrain is sold. Ok its easier for me to list what is already spoken for. This is a light roll over that can't be fixed(A pillars are too bent and the C pillars are tweaked). Its a straight drive/NP231 with only 98k on it.

Here is what is gone already;

Front axle and steering
T-case
Engine/tranny
engine wiring harness and ECU
tail lights
hitch and wiring
soundbar
stereo
seats and carpet
master cylinder/booster
fuel pump

Whats left;


It has all good glass with the exception of the windshield and passenger side front vent glass
3 good doors
pass front is trash
good hood
good header panel/grill
bumpers
fender flares
tires/wheels(225-75-15 all seasons on steel wheels)80% tread left
rear hatch and glass w/defrost
tan interior parts
radiator
possibly all A/C parts(I may keep that stuff for me)
8.25 3.07 rear end, probably a 27 spline. If its a 29 spline I will be keeping it.
drive shafts
drivers side front fender
Hand crank windows for you guys that want to remove your doors and not undo wiring
center console for straight drive

If you don't see it just ask!

Local pick up only, I will ship smaller stuff on your dime

Do you have the small plastic latch that keeps the console lid down?

bigalpha said:

Do you have the small plastic latch that keeps the console lid down?

Click to expand...

Yep, but it goes with the console! The interior is like new in this thing(except for the headliner)

Dang. I don't need the whole console, just that stupid latch. I can't find it anywhere.

bigalpha said:

Dang. I don't need the whole console, just that stupid latch. I can't find it anywhere.

Click to expand...

Clifton's auto salvage and Fowlers bros in Elkton have a few complete xjs, google them they are on the same road less than 1/4 mile apart.


Sorry for the thread jack.

PM sent on e-fan....

Update on whats gone and whats left.

Here is what is gone already;

Front axle and steering
T-case
Engine/tranny
engine wiring harness and ECU
tail lights
hitch and wiring
soundbar
stereo
seats and carpet
master cylinder/booster
fuel pump
Drivers side door
All hinges
Hood
steering box
E-fan
heater control

Whats left;


It has all good glass with the exception of the windshield and passenger side front vent glass
both rear doors
good header panel/grill
bumpers
fender flares
tires/wheels(225-75-15 all seasons on steel wheels)80% tread left
rear hatch and glass w/defrost
tan interior parts
radiator
possibly all A/C parts(I may keep that stuff for me)
8.25 3.07 rear end, probably a 27 spline. If its a 29 spline I will be keeping it.
drive shafts
drivers side front fender
Hand crank windows for you guys that want to remove your doors and not undo wiring
center console for straight drive
Steering column with a good air bag

If you don't see it just ask!

Add drivers side front fender/liner and fuel pump/sending unit to the "GONE" list.

I could use the front door-side hinges with the pins and the little clips that secure the sunvisors shipped to 30127
shoot me a pm with a price

XJerome95 said:

I could use the front door-side hinges with the pins and the little clips that secure the sunvisors shipped to 30127
shoot me a pm with a price

Click to expand...

all hinges are spoken for, I'll check to see if the clips are good, the roof is caved in at the sun visors.

PM'ed.. Also need the front bumper caps if you have them.

jtdesigns said:

PM'ed.. Also need the front bumper caps if you have them.

Click to expand...

I got your PM, I have a set of end caps as well, $15 for the caps. $75 on the steering column. You pick them up.

It will be a couple weeks though before i get it stripped down that far.

swaybar links?

OverTheHillsATTW said:

swaybar links?

Click to expand...

Yep, I still have them. PM me your zip and I'll quote you a price on them shipped

DO you still have the front driveshaft? I need it if you do. the splines on mine are worn .:new:

wild1joker said:

DO you still have the front driveshaft? I need it if you do. the splines on mine are worn .:new:

Click to expand...

Yep, its still in there. I haven't got that far yet but will next weekend. Note, this is a 4.0/AX15/NP231 XJ.

great- thats what i have too. how much are you asking?Shipped to 28390. Thanks.if the price is right-I'll take it.

wild1joker said:

great- thats what i have too. how much are you asking?Shipped to 28390. Thanks.if the price is right-I'll take it.

Click to expand...

$35 and you pay the shipping, shipping drive shafts is a PITA though. I will have to find some card board tubes to put it in. Due to the weight, its going to be expensive.

I still have some parts left!

Rear axle; 8.25 geared 3.07, don't know the spline count yet-$75
Rear hatch w/wiper/defrost/factory tint-$50
Tan interior trim parts and non power door panels, no carpet/seats/headliner-$35
Rear doors with no power and factory tint-$25 each
Passenger front door glass and hand crank regulator-$25
Center console, tan-$15
Bumpers, no caps-$15 each

There is more stuff, just ask

Tires/wheels-Tires have 70-80% tread left on them-$200


Rear doors w/hand crank windows and factory tint-$25 each



Steering column w/tilt and good air bag, no cruise-$50