• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

HP D60/14 bolt

sallys xj

NAXJA Forum User
Location
Arizona
Built one tons for sale. Both axles are 8x6.5 lug and will come with lug nuts, U bolts and brake lines. Both axles are fitted with the best components and assembled/built at Letzroll off-road in Mesa, AZ.
ASKING $6,500.00 will accept cash, paypal or cashiers check.
will ship but buyer pays shipping fees
Front Axle:
Ford Ball joint HP D60
driverside drop
Yukon 4.88 gears
Yukon Grizzly locker
Yukon Chromolly shafts
Yukon super joints
Yukon hardcore locking hubs
Ballistic diff cover

Set up for a 3 link with upper link on driver side


Pictures of front axle

11012859_1079768912038157_8756533453839772199_n.jpg


Lower link, shock tabs and limit strap mount
10999652_1079768942038154_5498760965595641728_n.jpg


11231036_1079768972038151_5414348902650616850_n.jpg


dirty but you can see the super joints
11059652_1079768988704816_1360037819316916822_n.jpg


Selectable hubs
11010565_1079768865371495_4899166996549253071_n.jpg


double sheer knuckle (passenger side)
11110162_1079768892038159_6332981349132841380_n.jpg


Rear axle:

GM full float 14 bolt
Yukon 4.88 gears
Yukon Spool
Ballistic diff cover/shave kit
Artec truss
disc brake conversion

Pictures

10929137_1079768772038171_7225326263563339061_n.jpg


set up for leaf springs but could be converted
11247718_1079768795371502_2893752405538796319_n.jpg


pinion guard
11049533_1079768828704832_6595046983389801669_n.jpg


14 bolt with disc brakes!
11245801_1079768852038163_4348803903172669021_n.jpg

Front and rear axle were just gone through, both received fresh fluid. Rear got new axle tube seals but does have a minor seep from the diff cover. being on 35s you tend to drag the rear. Should just need a new diff cover and I think you would be drip free. I did break a bolt in the 14 bolt center bottom hole. Was drilled and welded and new hole tapped just a tad off center. No issues with it.
both axles are ready to go under your rig...

18597_1079768738704841_1112219964537836234_n.jpg


I don't check back often so email me at [email protected] if interested.
 
Back
Top