Torque Converter Seating Dimension

Does anyone have a '97+ AW4 with factory converter available to check the dimension referenced in the attached AllData picture? I posted in the "Everything you need to know about AW4" thread but didn't get a response.

The '97 and '00 FSM state the dimension should be 0.650" for 6 cyl and AllData says 0.112". (AllData is often wrong) I recently overhauled an AW4 and with a reman converter, I'm measuring ~0.830". Before I attempt to run it like this and shear off the drive lugs on the inner pump gear, I'd like to confirm with another transmission.

Thanks for the help!

(Mods, feel free to move this if it's in the wrong spot)

Sent from my SM-N950U using Tapatalk

My AW4 service manual calls for .650".

Thanks. I agree that all the service manuals I've seen say 0.650". I'd like to know what people are measuring on actual transmissions though. I should have taken a measurement before disassembling the transmission.

Sent from my SM-N950U using Tapatalk