Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to the new NAXJA Forum!
If your password does not work, please use "Forgot your password?" link on the log-in page.
Please feel free to reach out to [email protected] if we can provide any assistance.
yep ... PN is BE5-6241-H7. These are the ones the Bilstein makes specifically for an XJ with 4" of lift. These aren't 5125's that i picked the length and valving on. I am at 4.5" in the front and compessed and drooped the suspension all the way and have not hit the limits of the shock.
Call Shane Casad at Bilstein (1-858-386-5900) and he can give the lengths and such.
They have servered me well. i am putting in the exact same shock, just designed for 5-6" of lift.
Mike - I need to flex my rig and see what will work.. for the record though (in case other buyers are interested), these are stud on top, grommet on bottom, 24" extended, 15" collapsed with 334/39 valving - per Bilstien...
i rode in a 3.5" RE wih OMEs and have found these to be a little nicer. I have owned 2.5", 4" and now 6" Bilstein's. I have had the opportunity to pick up OMEs along the way and have always gone for these. As they are both gas charged, they will be simlar. The valving is all the difference.
I sent the money via paypal for the shocks. I Can't wait to get them and see how they do compared to my OME with 30k on them which are too short for me now.
Thanks again,
Adam