DaveS98
NAXJA Forum User
- Location
- Chattanooga TN
Needs to be local. I am tired of traveling lol
I have an International Scout Dana 44 (1975 Model)
Its right at 59" wide..5x5.5 pattern 373 gears, has leaf perches welded, and some dumb welds holding on shock brackets.
Confirmed this is what its out of by the BOM.
The axle is basically stripped down to the bare metal..I had planned on building it but decided I need to invest in my front end first. The axle has everything but the drums
Wanting to trade for a HP 30 (any gear ratio) so long as its not the vacuum disconnect.
Located in Fort Oglethorpe GA
--Dave
I have an International Scout Dana 44 (1975 Model)
Its right at 59" wide..5x5.5 pattern 373 gears, has leaf perches welded, and some dumb welds holding on shock brackets.
Confirmed this is what its out of by the BOM.
The axle is basically stripped down to the bare metal..I had planned on building it but decided I need to invest in my front end first. The axle has everything but the drums
Wanting to trade for a HP 30 (any gear ratio) so long as its not the vacuum disconnect.
Located in Fort Oglethorpe GA
--Dave