shmoken875
NAXJA Forum User
- Location
- Blacksburg VA/ Bel Air MD
**please email me if you're interested, I'm normally only on my computer to check emails: [email protected]**
-(2) 8.25 29 spline shafts, spider gears, and thrust washers; was bought for a 27 to 29 spline conversion and never used. [$100]
**will now separate shafts for $50 a piece as well
-long side and short side dana 30 shafts with hub bearings for easy trail changing (3 bolts no need for 36mm axle-nut socket); long side has binding u-joint but good bearing, short side has good u-joint but the bearing is going (thats why they were spares) [$100]
-rustys trackbar brace, never used, bolts never even tightened, bought it to use with my rock krawler track bar, but it didn't line up right so I fabbed my own. $60 before shipping on rustys site, so I think $45 is fair.
Prices are before shipping, I would prefer pick-up but please be patient with me, I work 5am-5pm or later mon-fri and some saturdays so it's going to be tough to find time to go to the ups store. Pick-up preferred
-(2) 8.25 29 spline shafts, spider gears, and thrust washers; was bought for a 27 to 29 spline conversion and never used. [$100]
**will now separate shafts for $50 a piece as well
-long side and short side dana 30 shafts with hub bearings for easy trail changing (3 bolts no need for 36mm axle-nut socket); long side has binding u-joint but good bearing, short side has good u-joint but the bearing is going (thats why they were spares) [$100]
-rustys trackbar brace, never used, bolts never even tightened, bought it to use with my rock krawler track bar, but it didn't line up right so I fabbed my own. $60 before shipping on rustys site, so I think $45 is fair.
Prices are before shipping, I would prefer pick-up but please be patient with me, I work 5am-5pm or later mon-fri and some saturdays so it's going to be tough to find time to go to the ups store. Pick-up preferred