• Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Winch bumper, gas tank skid, steering brace and more...

9T3XJ

9T3XJ

NAXJA Forum User
Location
FoCo, Colorado
See pics below and let me know if you have any questions.

Front winch bumper - $150

Gas tank skid - $40

MORE steering box brace - $30

Procomp ES9000 shocks, less than 1,000 miles - $40

Stock hitch - $30

Extended front bumps - Make offer
95705586631cbe3baf85a684047ac632.jpg
ed1118e881141aa72eb1ba6df268dfa5.jpg
53d8e51db74e986e43196d91d6e4531b.jpg
8278f2200987a122d40e02227f25108f.jpg
50b13e11eeddb386313ef8e3a44310c1.jpg
9440069534cfcc0c2d732dedeef710c3.jpg
5bd2e88bd6c208608b46e4358dcb8e69.jpg
4e3b23b3836aa8ae45f6176d88652e6d.jpg
5a7296beac65f7760e044fd28aa989f1.jpg


Sent from my SM-G960U using Tapatalk
 
Jeeparado said:
What size lift are the shocks for?
Click to expand...
They came off an XJ that had about 5" lift, but the rear lower mounts were raised and the front mounts modified to eliminate the bar pins. I posted pics of the part numbers so some could Google it if they wanted.

Sent from my SM-G960U using Tapatalk
 
Any pics of the bumper on an XJ?
 
Did you make it? The gussets are cool... maybe post some measurements? Looks shorter then the one I want to ditch.. the who XJ mount is right in front of the grill? Requires trimming? The ends turn in below the end of the lights?


It’s a long drive to hold it up to my heap... if you can hold it up to yours or something to give it perspective would be cool.

Sorry to be a pain, just want to make the drive worth it for both of us
 
ShoeterMcgav said:
Did you make it? The gussets are cool... maybe post some measurements? Looks shorter then the one I want to ditch.. the who XJ mount is right in front of the grill? Requires trimming? The ends turn in below the end of the lights?


It’s a long drive to hold it up to my heap... if you can hold it up to yours or something to give it perspective would be cool.

Sorry to be a pain, just want to make the drive worth it for both of us
Click to expand...

I didn't build it. The winch mounts just in front of, and below the grill so it doesn't block much air flow. It doesn't require trimming the grill if that's what your asking. The ends turn in just outside of the lights, so the front corners are protected. It might require trimming the bottom edge of your fenders if you have a 96 or older.

I can try to prop it up against my Jeep this weekend to give you a better idea. What measurements do you want?
 
Over all length, depth of end turn ins and depth of mounts?

Looks shorter then my current bumper is why I ask..
 
ShoeterMcgav said:
Over all length, depth of end turn ins and depth of mounts?

Looks shorter then my current bumper is why I ask..
Click to expand...
So I put a straight edge across the bumper, centered over the forward most holes used to mount the bumper. It measures about 9" from those to the leading edge of the bumper, so it should stick out ~7" from the edge of the grill. Also measured about 61.5" wide. Hopefully the pics below help explain.


d1d319322857098ae867235b53b23148.jpg
6fea21e018c26aa364c345977e0d4831.jpg
51bd0768de24c8303128f7d0f430c1ab.jpg


Sent from my SM-G960U using Tapatalk
 
You must log in or register to reply here.

Similar threads

1
question about rear bumper, shackle relocation and gas tank skid plate fitment
Replies
10
Views
3K
IslanderOffRoad
IslanderOffRoad
M
New and need help
2 3
Replies
41
Views
9K
Evan03
E
D
Xj stuff
Replies
1
Views
2K
RedJeep2.0
RedJeep2.0
X
Re-homing my baby
Replies
0
Views
532
x-jay vision
X
PhillyPhanInDC
2000 XJ For Sale
Replies
2
Views
2K
PhillyPhanInDC
PhillyPhanInDC
Back
Top