1999mj
NAXJA Forum User
- Location
- Vernon,New Jersey
The Jeep collection is getting to be a little to much for me and I have to start getting rid of a couple so I'm starting with the grand cherokee.
1994 4.0 auto with under 150k no leaks and doesn't burn any oil.
dark blue with gray interrior
dana 30' 35 combo
flomaster 40 series with turndown
NP231 With AA SYE
Tom Woods front and rear shafts
4.5 RE Superflex Kit with 1" spacers front and rear
Rubicon gen2 Disconnects
JKS rear Adjustable Track bar
JKS bar pin eliminators
Rubicon express monotube shocks
stainless braided front brake lines
33x12.50 Firestone destination MT's on 15x8 Simulated beadlock wheels. Tires are 80% tread
Fenders are trimed a little in the front
Custom Unibody frame stiffiners 1/4" angle
Custom Rock sliders
Custom rear bumper
No front bumper
Full front rear and cargo Husky floor liners
Recent work done to it less then 5k
Ball joints
wheel bearings
complete steering replaced with Moog parts
Brake and calipers
Rear brakes and wheel cylinders and drums
Front axle u-joints.
The bad:
Truck has some body damage but nothing major. Lots of brush scratches and dings everywhere.
Needs front gears installed. I have them just haven't put them in. I replaced the rear with 4:10's and never got to the front which is 3:73's.
I will include both 3:73's for the rear and new 4:10's forthe front so you can replace either ones to get them matched up again.
Looking to get $3200.00 or best offer
1994 4.0 auto with under 150k no leaks and doesn't burn any oil.
dark blue with gray interrior
dana 30' 35 combo
flomaster 40 series with turndown
NP231 With AA SYE
Tom Woods front and rear shafts
4.5 RE Superflex Kit with 1" spacers front and rear
Rubicon gen2 Disconnects
JKS rear Adjustable Track bar
JKS bar pin eliminators
Rubicon express monotube shocks
stainless braided front brake lines
33x12.50 Firestone destination MT's on 15x8 Simulated beadlock wheels. Tires are 80% tread
Fenders are trimed a little in the front
Custom Unibody frame stiffiners 1/4" angle
Custom Rock sliders
Custom rear bumper
No front bumper
Full front rear and cargo Husky floor liners
Recent work done to it less then 5k
Ball joints
wheel bearings
complete steering replaced with Moog parts
Brake and calipers
Rear brakes and wheel cylinders and drums
Front axle u-joints.
The bad:
Truck has some body damage but nothing major. Lots of brush scratches and dings everywhere.
Needs front gears installed. I have them just haven't put them in. I replaced the rear with 4:10's and never got to the front which is 3:73's.
I will include both 3:73's for the rear and new 4:10's forthe front so you can replace either ones to get them matched up again.
Looking to get $3200.00 or best offer
