• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Transfer Case Linkage

Tim00XJ

NAXJA Forum User
Location
Phoenix, AZ
I'm having trouble getting the one link coming down from the transfer case shifter inside the vehicle to pop back into place on the actual transfer case linkage itself. I tried taking channel locks to get the rubber bushing back into the hole, but that did not work. Have any ideas?

Here's a couple of pictures showing the problem:

img0612wi9.jpg
img0610zc7.jpg
 
Take the linkage off and just snap in the fitting by itself.
 
Loosen the adj bolt,remove the linkage rod,then pop the fitting back in.Then re-install and adj the rod.
 
Back
Top