• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Still Strugglin'

The Hard Struggler

NAXJA Forum User
Location
Atlanta GA.
Well, Team Struggle sits at a TA Travel Center waiting for a set of four new tires to be mounted to the bus in Knoxville.

FOR 6-1/2 HOURS!!!!!


At least we have good company, Matt and Tiff Morgan stopped by to hang out.

We will be there eventually!
 
Wow Tim. That has to stink but like you said, at least you have company.

That is one thing that the SEC does well. We stay and stick together. When Mark and I were having trouble with the Dodge diesel in 2008 and we were slowing everyone down, you guys stayed with us until we figured what was wrong and found a solution.

What happened that you need 4 new tires all at once?
 
Four blow outs at one time??? Or preventive maintenance??

See you guys tomorrow!!!!
 
One blown recap and limited choices on july 4th evening
 
That does bring the suck. If you guys are still there in the morning, we'll stop by and hang with ya.

BUT here's hoping you guys are long gone!!!!!
 
Oh. Are they an odd size? What are they going to put on there?
 
Recap on the driver side decided that it wanted off.

Bus goes,
BOOM! BANG!

Flap.
Flap.
Flap.
Flap.
Flap.


Tim goes "damn".

So they have no 10r-22.5 to match what we have, so 4 new it is.

295/75/22.5.
 
You coming on up tonight?
 
2 more tires then on his way
 
10R22.5's are odd. The new size they sold you can be found anywhere. They are referred to as Low pro 22.5's.
 
Tim's gonna be driving a low rider????


Sounds like you'll be on your way shortly, that's a good thing.
 
He made it! Them tires sure are purdy! LOL!
 
... what the hell was that noise i heard across the mountain, maybe an RCV shaft?
 
Back
Top