• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Gen II sliders

RCP Phx

NAXJA Forum User
Location
Phoenix,Az
In an efffort to stiffen my Cheromanche project I made a few changes from my 2000's rail's.Increased the pinch rail from 1x1 to 1x1-1/2.Also did a double mitre on the ends.The main change was picking up the entire rear spring pocket.New mounting consists of(per side):
10>1/4" bolts(thru the pinch seam and frame rail)
2>1/2" bolts(thru the frame rail)
2>7/16" bolts(thru the front of the spring pocket)
1>1" bolt (up into the B pillar cage hoop)
1>14mm bolt thru the leaf spring mount(not shown in these pics)
more pics at:http://hometown.aol.com/rpayne9421/page8.html
slider%2001.jpg
 
Re: Gen II sliders (re-pic)

With all the old posts pics gone, and the other request's.............
_7A_00339_zpsriab86pu.jpg

_6A_00340_zpsb2zhjtt9.jpg

_5A_00341_zpsqwm99o71.jpg

_4A_00342_zps6qbhhgxu.jpg

_3A_00343_zpsrtlqqe1i.jpg

_1A_00345_zps700hbglx.jpg

_7A_00339_zpsriab86pu.jpg

66740026_zpsmze088qs.jpg

66740022_zpscleyg2fr.jpg
 
Last edited:
Re: Gen II sliders (re-pic)

I have a really old set I build back in the day and looking to install them on my 00. Any reason not to weld them on vs bolt?

Your's look much prettier than mine!
 
Back
Top