nickjc13
NAXJA Forum User
- Location
- los angeles, ca / mississippi
bump
injectors
- Thread starter nickjc13
- Start date
gray_penguin
NAXJA Forum User
- Location
- charlotte nc
would these work in a 2.5L 4-cyl?
nickjc13
NAXJA Forum User
- Location
- los angeles, ca / mississippi
i mean they will fit if that is what your asking?
gray_penguin
NAXJA Forum User
- Location
- charlotte nc
I was curious if the injectors were the same in a 4.0L as the 2.5L
After looking at parts sites and the jeep catalog pdf I have, it looks like there are different part numbers for each. Not sure what the diff is, maybe the pounds per hour rating.
After looking at parts sites and the jeep catalog pdf I have, it looks like there are different part numbers for each. Not sure what the diff is, maybe the pounds per hour rating.
nickjc13
NAXJA Forum User
- Location
- los angeles, ca / mississippi
im pretty sure that the lbs are different. and if your looking for a stock injector then i would not buy these. if your motor is completely stock then these are probably not the injectors you are looking for
Cnickgo
Do you need assistance?
- Location
- Monterey, CA
Look at the color of your stock injector tops. They will fit, but they may not be the right flow. I know my buddy's TJ 2.5L has grey tops which are 23lb. IIRC, you should be looking for 21lb, but don't quote me on that.
nickjc13
NAXJA Forum User
- Location
- los angeles, ca / mississippi
yes they will fit but thats what i meant the flow will not be right. they will fit though. just dont want to sell you something you dont need
nickjc13
NAXJA Forum User
- Location
- los angeles, ca / mississippi
still have these
nickjc13
NAXJA Forum User
- Location
- los angeles, ca / mississippi
still have a few sets for sale.
nickjc13
NAXJA Forum User
- Location
- los angeles, ca / mississippi
ill take 40 shipped per set
nickjc13
NAXJA Forum User
- Location
- los angeles, ca / mississippi
still have a few sets for sale.
- Location
- Roanoke VA
NCjeepgirl83
NAXJA Forum User
- Location
- Charlotte, NC/Birmingham, England
So these would not work on a completely stock engine?
nickjc13
NAXJA Forum User
- Location
- los angeles, ca / mississippi
yes they will. everyone that i have sold them to so far has put them on a stock engine. i dont think i have sold them to anyone with a built engine yet. i had a set on my stroker. but i was going to buy a set before i bought my stroker for my stock 4.0.
nickjc13
NAXJA Forum User
- Location
- los angeles, ca / mississippi
also ncjeepgirl83 your message box is full. i tried to pm you.
supersuby483
NAXJA Forum User
- Location
- clarksville
how much for a set to 37042?
nickjc13
NAXJA Forum User
- Location
- los angeles, ca / mississippi
$40 shipped
Last edited:
coolkidmc
NAXJA Forum User
- Location
- Hammonton, NJ
Pm sent!!
DrRandy
NAXJA Forum User
- Location
- B'Ham Alabama
Are they new? any left...need full set?
nickjc13
NAXJA Forum User
- Location
- los angeles, ca / mississippi
no they are not new. they are used. i do have a few sets left. i ship 8 out so you have a few trail spares.
