• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

headers for sbc in a comanche??

CV95XJ

NAXJA Forum User
Location
Hinckley, IL
hey guys, anyone have any experience with what headers to use for a small block in a comanche? or maybe even an older cherokee?

I am using the advanced adapters motor mounts. I just tried a set from summit, they are block huggers and exit straight down, but their is not enough room for them on the passenger side. the drivers side fits alright but is a little tight. if the passenger side came down towards the back of the block their is more room, but if they came down towards the back of the block on the drivers side it would hit the clutch cylinder or whatever its called.

basically I need these for the drivers side (these are what I have)
http://cgi.ebay.com/ebaymotors/sbc-...727|39:1|65:12|240:1318&_trksid=p4506.c0.m245



and something like this for the passenger side
http://cgi.ebay.com/ebaymotors/CAM-...temQQhashZitem230289641364QQitemZ230289641364



could I run 2 different headers? or what would you recommend?
 
that is the last resort at this time, ive seen that post, but mine isn't as hardcore I will be driving mine on the street so I would like to keep the integrity of the "frame"


What I really want to know is, If I run 2 different headers, (one comes down in the middle of the block, other comes down towards the back) although having similar lengths to collectors and diameter of tube. will it affect the motor at all???
 
Back
Top