• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

NEW Tire Carrier Hinge DIY Kits!!!

AJsArmor

NAXJA Forum User
Location
Iowa
FINALLY!! Not satisfied with the quality of the traditional spindle/bearing hinge setups, we set out to design our own tire carrier hinge that we would be trust in 100% for our own products. The spindle/bearing setups are known to crack and snap off at complete random, not something we'll ever use on our products again.

Quality comes at a price but we've done a lot to keep it as low as we can. Introductory price of $95, can ship to anywhere in the US for $13 using flat rate USPS Priority mail. We have 4 available for immediate shipping and will have 20 more ready to ship next week.

Throughout the process of design we kept quality in mind to give customers the absolute best product possible. So here's what's included!

  • CNC laser cut top/bottom plates and 3 supports
  • precision machined bearing tube with grease zerk and dust cap
  • tapered roller bearings and oil seal
  • threaded rear supports with socket head cap screws
  • MASSIVE 1" shoulder bolt with 3/4" threads
  • bellville lock washer and 3/4" grade 5 nut
TCH7.jpg

ASSEMBLED
TCH3.jpg

BOTTOM SUPPORTS
TCH4.jpg
 
Last edited:
Some more pics, having the plast CNC laser cut makes for an absolute precision fit!
TCH6.jpg

Showing the bottom bearing in place with spacer.
TCH8.jpg

Oil seal set into place but not pressed in.
TCH9.jpg
 
Back
Top